Ir para o conteúdo

Medição sem cookies

Porque este aviso

Usamos um registo anónimo, apenas neste site, para perceber que pesquisas não encontram nada e que links são clicados. Nenhum cookie publicitário, nenhum identificador entre visitas, nada de IP: os eventos em bruto ficam 30 dias, depois apenas agregados. Pode recusar e o site funciona da mesma forma. Política de privacidade · Política de cookies

Todo Ernesto

Guiastrumenti fai-da-te da officina o laboratorio

How to choose a laser level: lines, range and accuracy

A laser level replaces a plumb line, spirit level and tape measure when you align tiles, shelves or ceilings. But two models with the same declared accuracy can behave very differently: this guide explains why.

Por Redazione Todo Ernesto5 min de leituraPublicada a 12 de novembro de 2026Atualizada a 12 de novembro de 2026Ver a categoria
Nesta guia3
  1. 01Lines and accuracy: how to read the values
  2. 02Red or green, indoors or outdoors
  3. 03Power, mounting and self-levelling
01

Lines and accuracy: how to read the values

Accuracy is almost always stated as ±X mm per metre. ±0.2 mm/m is excellent indoors, ±0.3 mm/m is normal, and beyond ±0.5 mm/m only suits rough work. Error grows with distance, so at ten metres it can double the value measured at five.

The number of lines tells you what you can do: one horizontal line is enough for shelves and pictures, two lines (horizontal and vertical) suit tiles and walls, three 360° lines cover a whole room. More lines do not improve accuracy, but they save you from rotating the level.

02

Red or green, indoors or outdoors

A red laser is cheaper and uses less power; green is far more visible to the naked eye, especially in bright rooms and outdoors. The difference really shows against a light wall or in sunlight.

Declared range assumes ideal conditions. Outdoors or under neon the visible line shortens a lot: if you work outside, look for a model with a receiver or dedicated glasses, or accept using it only in shade.

03

Power, mounting and self-levelling

Rechargeable battery levels are convenient but heavy; AA-powered ones are available anywhere and will not leave you stuck if you forget the charger. Also check whether the model accepts external power, useful for long jobs.

Self-levelling within a few degrees is what makes a laser level practical: tilt it too far and the laser blinks until you bring it back to level. A magnetic base or tripod thread makes the difference on walls and ceilings.

Perguntas frequentes

Does the level need calibration?

Budget levels are calibrated at the factory and cannot be adjusted. After a hard knock, check accuracy with a simple test: compare two lines while rotating the level 180 degrees on the same wall.

Can I use it for tiling?

Yes, it is one of the main uses. You need at least one vertical and one horizontal line, ideally with enough range to cover the wall. For large floors consider a 360° model or a tripod.

Is the laser dangerous for the eyes?

Consumer laser levels are class 2: brief accidental exposure is not dangerous, but you should never look into the beam or point it at people. Follow the manufacturer's instructions and never dismantle the device.

As guias são editoriais e independentes. Os links para os produtos são afiliados. Informação sobre afiliação.

Produtos recomendados

Ver tudo

Outras guias

Ernesto

Do produto certo ao profissional certo.

O Todo Ernesto ajuda a escolher o que comprar. O Ernesto põe em contacto com profissionais da sua zona para o instalar, reparar ou realizar o trabalho.

Orçamentos gratuitos e sem compromisso · Inscrição de profissionais gratuita

Tem um trabalho a fazer?

Descreva o que precisa e receba orçamentos gratuitos de profissionais da sua zona.

Pedir um orçamento

É um profissional?

Crie o seu perfil gratuito no Ernesto e receba pedidos de trabalho na sua zona.

Inscrever-me como profissional