Skip to content

Guidestrumenti fai-da-te da officina o laboratorio

How to choose a laser level: lines, range and accuracy

A laser level replaces a plumb line, spirit level and tape measure when you align tiles, shelves or ceilings. But two models with the same declared accuracy can behave very differently: this guide explains why.

By Redazione Todo Ernesto5 min readPublished on 12 November 2026Updated on 12 November 2026Browse the category
In this guide3
  1. 01Lines and accuracy: how to read the values
  2. 02Red or green, indoors or outdoors
  3. 03Power, mounting and self-levelling
01

Lines and accuracy: how to read the values

Accuracy is almost always stated as ±X mm per metre. ±0.2 mm/m is excellent indoors, ±0.3 mm/m is normal, and beyond ±0.5 mm/m only suits rough work. Error grows with distance, so at ten metres it can double the value measured at five.

The number of lines tells you what you can do: one horizontal line is enough for shelves and pictures, two lines (horizontal and vertical) suit tiles and walls, three 360° lines cover a whole room. More lines do not improve accuracy, but they save you from rotating the level.

02

Red or green, indoors or outdoors

A red laser is cheaper and uses less power; green is far more visible to the naked eye, especially in bright rooms and outdoors. The difference really shows against a light wall or in sunlight.

Declared range assumes ideal conditions. Outdoors or under neon the visible line shortens a lot: if you work outside, look for a model with a receiver or dedicated glasses, or accept using it only in shade.

03

Power, mounting and self-levelling

Rechargeable battery levels are convenient but heavy; AA-powered ones are available anywhere and will not leave you stuck if you forget the charger. Also check whether the model accepts external power, useful for long jobs.

Self-levelling within a few degrees is what makes a laser level practical: tilt it too far and the laser blinks until you bring it back to level. A magnetic base or tripod thread makes the difference on walls and ceilings.

Frequently asked questions

Does the level need calibration?

Budget levels are calibrated at the factory and cannot be adjusted. After a hard knock, check accuracy with a simple test: compare two lines while rotating the level 180 degrees on the same wall.

Can I use it for tiling?

Yes, it is one of the main uses. You need at least one vertical and one horizontal line, ideally with enough range to cover the wall. For large floors consider a 360° model or a tripod.

Is the laser dangerous for the eyes?

Consumer laser levels are class 2: brief accidental exposure is not dangerous, but you should never look into the beam or point it at people. Follow the manufacturer's instructions and never dismantle the device.

The guides are editorial and independent. Product links are affiliate links. Affiliation disclosure.

Recommended products

View all

More guides

Ernesto

From the right product to the right professional.

Todo Ernesto helps you choose what to buy. Ernesto connects you with local professionals to install it, repair it or get the job done.

Free, no-obligation quotes · Free professional sign-up

Have a job to do?

Describe what you need and get free quotes from local professionals.

Request a quote

Are you a professional?

Create your free Ernesto profile and receive job requests in your area.

Join as a professional