Guidestrumenti da piastrellista
How to choose a tile cutter: 2026 guide
A tile cutter decides whether a job looks clean or full of chips. You do not need the biggest model: you need one suited to the tile format and material you have to cut. This guide covers the figures that matter and when manual cutting is no longer enough.
In this guide3
Material and format: the first choice
Glazed ceramic cuts easily with a manual lever cutter and scoring wheel. Glazed porcelain is harder and needs more pressure, a quality wheel and often a breaker. Large-format rectified porcelain (60×120 cm or more) is where manual cutting becomes tiring and imprecise.
Maximum cutting length must exceed the diagonal of the largest tile, not just its side. A 60×60 cm tile has a diagonal of about 85 cm: a 90 cm cutter is the minimum, a 120 cm one leaves room for diagonal cuts and support.
Manual or electric: when to switch
A manual cutter is fast, quiet, dust-free and enough for most home jobs. The limit is the material: on large rectified porcelain the cut can chip and the edge is not comparable to the factory finish.
An electric cutter with a diamond blade cuts any material, including thick porcelain, and allows curved and L-shaped cuts. In exchange it makes dust and noise, needs water or extraction and costs much more. For a bathroom or kitchen the manual tool is enough; for a whole flat in large porcelain the electric one pays for itself in time and waste.
Scoring wheel, breaker and accessories that matter
The scoring wheel is the heart of the tool: it must be tungsten carbide, replaceable and mounted on a carriage that runs without play. A worn wheel or a loose carriage produces out-of-square cuts. The breaker, often sold separately, applies pressure at the right point and reduces chipping on porcelain.
The bed must be wide with adjustable stops for diagonal cuts. Look for non-slip feet and a guide bar that does not flex under pressure. For large formats, a longer base with side support is more stable than a compact one: accuracy also depends on how still the tile stays.
Frequently asked questions
Can a manual tile cutter cut porcelain?
Yes, glazed porcelain of moderate thickness with a good wheel and a breaker. On large rectified porcelain the edge can chip: visible laying needs electric cutting or edge polishing.
How long should the tile cutter be?
It must exceed the diagonal of the largest tile. For 60×60 cm you need at least 90 cm; for diagonal cuts on 60×120 cm you need a 130-150 cm model or electric cutting.
Scoring wheel or diamond blade?
The wheel is faster and cleaner on ceramic and glazed porcelain. The diamond blade is slower and louder but cuts any material and allows curved cuts; it is needed for thick porcelain and large formats.
The guides are editorial and independent. Product links are affiliate links. Affiliation disclosure.
