Skip to content

Guidestrumenti di misurazione elettronica

How to choose a multimeter: practical 2026 guide

A multimeter tells you whether a socket is live, a battery is flat or a cable is broken. Prices run from €15 to €300, but the difference is not only accuracy: a model unsuited to the voltage you are measuring is dangerous. This guide explains which figures to read before buying.

By Redazione Todo Ernesto6 min readPublished on 13 November 2026Updated on 13 November 2026Browse the category
In this guide3
  1. 01Safety category: the figure that comes first
  2. 02Counts, resolution and accuracy
  3. 03True RMS and the functions you actually use
01

Safety category: the figure that comes first

The category (CAT II, CAT III, CAT IV) states which installations the meter can be used on safely under IEC 61010. CAT II covers appliances and domestic sockets, CAT III covers distribution boards and lines, CAT IV the service entrance and meter. For home use a CAT III 600 V is the prudent choice; CAT II 300 V is only acceptable on appliances disconnected from the mains.

The category is not marketing: it is printed on the front and in the manual together with the maximum voltage. A cheap meter with no declared category is not a safe measuring instrument, even if it reads a battery correctly. If you need to work inside a distribution board, call an electrician: a tool does not replace experience.

02

Counts, resolution and accuracy

Counts describe how many digits the meter can show: a 2,000-count model reads up to 1.999 V on the 2 V range, a 6,000-count one reaches 5.999 V. More counts mean more resolution, not necessarily more accuracy: accuracy is declared as a percentage plus digits and must be read together with the range.

For DIY, 2,000-4,000 counts are enough for voltage, continuity and diodes. If you measure low currents, sensors or electronic components, you need 6,000 counts or more and auto-ranging. DC current accuracy on budget models is often ±(2% + 3 digits): fine for diagnostics, not for a lab.

03

True RMS and the functions you actually use

True RMS matters when the waveform is not sinusoidal: inverters, variable-speed drives, switching power supplies, UPS units. An averaging meter reads the wrong value on these loads. For sockets and batteries it is not essential, but in a modern home with solar or a heat pump it becomes useful.

The time-saving functions are continuity with a buzzer, diode test, capacitance and temperature with a probe. A clamp meter is a different tool: it measures current without opening the circuit, but does not replace a multimeter for voltage and resistance. Also check the protection fuse: if it is soldered in and not replaceable, one wrong range can make the meter useless.

Frequently asked questions

Which safety category do I need at home?

For sockets, appliances and small systems a CAT III 600 V is the prudent choice. CAT II is only acceptable on appliances disconnected from the mains; for the main board you need CAT III or CAT IV and, above all, a professional.

Is True RMS really necessary?

It matters if you measure inverters, solar, UPS units or switching supplies. For sockets, batteries and continuity a standard RMS model is enough and costs less.

How much should I spend?

For home use €30-70 buys a meter with a declared category, auto-ranging and a replaceable fuse. Below €20 the safety category is often missing: that is not a saving, it is a risk.

The guides are editorial and independent. Product links are affiliate links. Affiliation disclosure.

Recommended products

View all

More guides

Ernesto

From the right product to the right professional.

Todo Ernesto helps you choose what to buy. Ernesto connects you with local professionals to install it, repair it or get the job done.

Free, no-obligation quotes · Free professional sign-up

Have a job to do?

Describe what you need and get free quotes from local professionals.

Request a quote

Are you a professional?

Create your free Ernesto profile and receive job requests in your area.

Join as a professional