Guideattrezzi da giardinaggio
How to choose a hedge trimmer: 2026 guide
A hedge trimmer is held up for tens of minutes: weight and blade length decide whether the job takes half an hour or two. This guide covers the figures that matter and when it is worth moving from cable to battery.
In this guide3
Blade length and cutting gap
Blade length decides how much you do per pass: 45-50 cm is enough for low hedges and shrubs, 55-60 cm is the most common size for medium hedges, beyond 65 cm you cover long straight hedges but the machine gets heavier and harder to control vertically. A long blade on an uneven hedge tends to jam.
The cutting gap (distance between teeth) sets the maximum branch diameter: 15-20 mm for light trimming and maintenance, 25-30 mm for thicker branches. A large gap on a fine hedge leaves ragged cuts, a small one jams on hard branches. Tooth count and shape matter as much as the gap: long spaced teeth cut branches, dense teeth finish.
Cable or battery: what actually changes
A corded model has constant power, costs less and is lighter because it carries no cells. The limit is reach and cable management, which among branches is the main cause of accidental cuts. For a hedge near a socket it is the most efficient choice.
A battery model frees you from cables and works anywhere in the garden, but battery weight is felt because the machine works high, away from the body. A 2-4 Ah pack gives 30-60 minutes; two packs are more useful than one bigger battery because weight stays low. Check that the battery is shared with other tools of the same brand: that is the real saving.
Ergonomics, safety and blade care
The handle must be reachable without stretching and the safety switch must sit under your thumb, not on the shaft. A rotating handle lets you cut the top of the hedge without lifting the machine above your head, which is the most tiring and dangerous position. Look for the hand guard and front protection: they are mandatory and must never be removed.
Clean sap off the blade with a solvent after every use and oil it lightly: hardened resin increases friction and heats the motor. Do not sharpen the teeth with an aggressive grinder: you lose the geometry and the blade tears instead of cutting. Check the play between blade and counter-blade: too much produces uneven cuts and vibration.
Frequently asked questions
What blade length for a 20-metre hedge?
A 55-60 cm blade is the best compromise: it covers the work without making the machine too heavy to hold up. Beyond 65 cm only makes sense on very long, straight hedges.
Cable or battery?
With a socket nearby, a cable gives constant power for less money. If the hedge is far away or you have to work from a ladder, battery power removes the cable risk among branches.
How often should the blade be sharpened?
It is not ground with a disc: clean the resin off after every use and replace it when it starts tearing. A new blade costs less than an overheated motor.
The guides are editorial and independent. Product links are affiliate links. Affiliation disclosure.

