ST4047 Pneumatic Crimper KIT YJQ-X2Q-2.0/2.5/3.0 four-indent pneumatic crimping tool is a customized crimp tool applied to annular crimping of springwire socket.
The inside diameter of springwire socket sheath is 2.0/2.5/3.0mm, the outside diameter is 4.0/4.5/5.0; Four-impression crimping, circumferential distribution, impressions are in the same plane.
UH2-C029 positioner is used to locate contacts horizontally and vertically between the indenters of the tools which ensures the accuracy and consistency of the crimping position. The height adjusting screw can be rotated until the contact is in the proper position for crimping. Suitable for different types of contacts.
This KIT contains two kinds of control mode: Figure1: Foot valve control mode Figure2: Hand valve control mode Using 1.54mm hex wrench Unscrewing the setting screw when in manual control(Unscrewing 0-1mm above the reference plane, until manual control is recovered.
Do not force the screw out to prevent the screw mechanism from damaging.) Screwing in the setting screw when in the foot valve control (Screwing 1-2mm into the reference plane, until foot valve control is recovered. Do not force into the screw to prevent the screw mechanism from damaging.)
The information below comes from the Amazon catalogue and is reported without adding opinions or invented data. The full description and variants are on Amazon.