Skip to content
Ernesto's choiceOUBAYLEW

Macchina per incisione USB a quattro assi 1500W VFD CNC 6040 macchina per incisione macchina per incisione fresatrice macchina per incisione del metallo lavorazione del legno

Visit the OUBAYLEW storeRead the verified reviews on Amazon

Availability on Amazon


Macchina per incisione USB a quattro assi 1500W VFD CNC 6040 macchina per incisione macchina per incisione fresatrice macchina per incisione del metallo lavorazione del legno

About this item

  • Category: Fresatrici verticali, lamellatrici e refilatori

Parametri CNC per incisione: X,Y,Z Working Area: 600(Y)*390(X)*120(Z)mm Dimensioni d'uscita: 865 x 680 x 570 mm (L x l x h). Dimensioni tavolo: 770 (Y) x 490 (X)mm. Struttura in lega di alluminio 6061/6063. Max. Feeding height: ≤ 100 mm.

Brand
OUBAYLEW
ASIN
B085NLXWRK
Category
Fresatrici verticali, lamellatrici e refilatori
Warranty
12 months

Todo Ernesto does not show its own prices or availability: the updated figure is always the one published on Amazon. Todo Ernesto is a discovery guide: it does not sell, ship or handle returns. The transaction takes place entirely on Amazon.

Offers and sellers

A single offer, with no verified price: there is no comparison to show.

Offers and sellers
SellerPriceShippingConditionAvailabilityUpdated
Amazon.itMain offer—Not declaredNewNot declared—Go to the offer

Shipping cost is not declared by the connected sources and is not estimated: check it in the cart.

Similar products

The definitive price and availability are the ones shown on Amazon.

View all

The page in short

Description

Parametri CNC per incisione: X,Y,Z Working Area: 600(Y)*390(X)*120(Z)mm Dimensioni d'uscita: 865 x 680 x 570 mm (L x l x h). Dimensioni tavolo: 770 (Y) x 490 (X)mm. Struttura in lega di alluminio 6061/6063. Max. Feeding height: ≤ 100 mm.

Drive Unit X,Y axis 1605 Ball Screws Z axis 1204 Ball Screws Sliding Unit X,Y,Z axis High intensity Chrome shaft Stepping motore: 57 two-fase, 3 A, 150 N.cm. Motore Spindle 1. Il motore ad acqua può funzionare a lungo fino a quando il motore è freddo. 2.

Il motore ad acqua ha un'elevata stabilità e una maggiore concentricità rispetto al motore ad aria compressa. Tips: 1. Il motore spindle deve essere collegato con il VFD. 2. Si collega direttamente alla tensione di alimentazione (AC110 V/220 V). 3. Si prega di cambiare la impostazione dei dati del VFD.

Se non siete tecnici professionali, o si danneggia il motore. Parametri: Dimensioni d'uscita: 65 x 158 mm. Materiale: acciaio inossidabile 304, copper coil,pressure cast alluminio pipe water jacket Volt, corrente, potenza: AC220 V ~ 240 V/50 Hz, 5 A, 1,5 KW VFD. Velocità di spindle: 24000 rpm.

Frequenza massima di funzionamento: 400 Hz. Assi principali collet: ER11collet,impostazione standard: 6 mm. Nut Model: ER11-A Cooling: Water-Cooling Modalità velocità: tramite regolazione della tensione VFD e frequenza operativa. Lubrificazione Way: lubrificata dall'alta velocità. Ripetizione accurata: 0,05 mm.

Precisione: radial beat acuities 0,03 mm. Istruzioni per la seguenti istruzioni: G code / TAB fili / NC file / NCC fili Comunicazione interfaccia: porta USB con computer. Software ambientale: Windows XP/WIN7 32BITS. Velocità massima Idle: 1500 mm/min. Velocità di lavoro: 50-1500 mm/min (diversi materiali diversi).

The information below comes from the Amazon catalogue and is reported without adding opinions or invented data. The full description and variants are on Amazon.

Todo Score

Score based on the data

39

/ 100

Score computed on 2 of 4 criteria. Data coverage: 55%.

  • Information30/100

    0 declared specifications · 1720 description characters · 12-month warranty

  • Perceived qualityNo data

    no usable rating

  • PriceNo data

    no verified price

  • Offer reliability50/100

    availability not declared

How we calculate the score

Four criteria, each with a fixed formula over catalogue data. A criterion without data is excluded and the remaining weights are renormalised; below 50% coverage the score is not published.

Profile DIY: information 30%, quality 20%, price 25%, reliability 25%.

Affiliate commission never enters the formula: the same product scores the same at any store.

Technical data

The catalogue does not provide additional technical specifications for this product. Full details are on Amazon.

ASIN

B085NLXWRK

Found the specs you were looking for?

The definitive price and availability are the ones shown on Amazon.

View on Amazon

Built only from catalogue fields: no added judgement.

Strengths and things to verify

Supported by data

  • Declared warranty: 12 months
  • Description provided by the source

To verify

  • No declared specifications
  • No ratings available
  • Price not verified

Who it may suit

  • Professional use

Use declared by the source, not inferred from the category.

What to check on Amazon

What the data says

Macchina per incisione USB a quattro assi 1500W VFD CNC 6040 macchina per incisione macchina per incisione fresatrice macchina per incisione del metallo lavorazione del legno is a OUBAYLEW product in Fresatrici verticali, lamellatrici e refilatori. The catalogue row does not include structured specifications for this product. The price we show is the amount we observed at the date on the page; variants and availability are confirmed by the store.

The catalogue declares 12 months of manufacturer warranty. Keep the Amazon order confirmation as proof of purchase.

What to check on Amazon

What to check before buying in Fresatrici verticali, lamellatrici e refilatori

Compare the specifications that are present for every product: a missing value cannot be assumed from the title.

Check the variant (size, colour, model) on the Amazon page before buying: the catalogue row can cover more than one variant.

Verify compatibility with what you already own using the declared model or measurements.

What to check on Amazon

How it compares

On this page you can compare it with 4 other real products from the same catalogue (Mafell, Berlan, VEVOR and QINGRUI). The comparison table only shows specifications that both rows actually declare.

A price appears only when we observed it recently, and it always carries the date of that check. When the observation is stale we remove the amount instead of guessing it.

Frequently asked questions

Frequently asked questions

Which brand is Macchina per incisione USB a quattro assi 1500W VFD CNC 6040 macchina per incisione macchina per incisione fresatrice macchina per incisione del metallo lavorazione del legno?

The catalogue lists OUBAYLEW as the brand. Check the exact model and seller on the Amazon page.

Where can I check price and availability?

On Amazon: the button on this page opens the product page with our affiliate tag. We do not store or guarantee live prices.

Buy on Amazon.it

One last check before you buy

Open the Amazon listing for the updated price, variants and availability.

View on Amazon

Explore

Why it is on Todo Ernesto

This product is in the catalogue because it has a valid Amazon link and a page with available technical information. We do not accept payments from sellers to include it.

Ernesto

From the right product to the right professional.

Todo Ernesto helps you choose what to buy. Ernesto connects you with local professionals to install it, repair it or get the job done.

Free, no-obligation quotes · Free professional sign-up

Have a job to do?

Describe what you need and get free quotes from local professionals.

Request a quote

Are you a professional?

Create your free Ernesto profile and receive job requests in your area.

Join as a professional